Used Boats: 35 Adverts Displaying: 1-10
PRINCIPAL DIMENSIONS
Length o.a. 15,00 m
Breadth o.a. 6,3 m
Draft 0,9 m
GRT 15,6
Max. deck load 1,5 ton/mÇ
Max. 6 ton total
Free deck space Tot. 14 mÇ
Fwd. 8 mÇ
Aft 6 mÇ
Cargo Capacity Fwd. 0,750 ton
Aft 1,5 ton
Max. Deadweight 4 ton
Maximum speed 22 knots - 220 L/h
Service speed 19 knots - 180 L/h
Range 255 Nm at 19 kts...
read more
12m Catamaran Crew Transfer vessel
MAIN PARTICULARS
Flag FRENCH
Year built 2009
Passengers 12
Hull Material GRP
Crew 2
Length Overall 13.1m
Length Hull 12.0m
Beam Overall 5.4m
Draught 0.7m
Fuel Capacity 1600l
Lightship 13t
Fresh Water
Capacity 90l
SPEED & CONSUMPTION
Service speed 22 kts
Max speed 27 kts
Fuel consumption @ Max speed 120l/h
Fuel Consumption @ 20 kts 100l/h...
read more
These new build vessels are built for various fishing applications including bottom trawling, purse seining, long lining, mining, squid fishing and research, and many vessels are custom built to satisfy the customer’s every need. Vessels are designed with a large hold capacity, yet still maintain spacious engine room and accommodation areas. Many of the vessels are built to include more than one application to allow for products to be processed at sea. The material is also so versatile that a range of sizes are available from 33 feet to 100 feet based on existing molds....
read more
Length: | 26.40m |
Location: | Western Cape South Africa |
View Details |
This all-steel welded stern trawler with two continuous decks and three watertight bulkheads. The superstructure is fitted forward of midships with a hold on the foredeck. There are two insulated refrigerated holds below the main deck and the engine room is aft below the factory deck
The vessel has a raked stem, a foremast, a midship mast over the bridge and a transom stern which accommodates the stern ramp for hauling the trawl net.
The trawl deck has raised sides and there are storerooms built into the raised sections on both the port and starboard sides. The electrically driven main tra...
read more
Ex US Navy Floating Freshwater Maker
The barge was built for the US army and was kept as a standby RO system in case US Army requested her operation. The barge was never used and all equipment was preserved and labelled with date. The Membranes that came with the unit are all still in plastic and stored.
This barge has the capability of producing 300,000 gallons of drinking water at 24hr. period and due to its 4 point mooring system sea conditions does not exceed Sea state 3. Barge cannot operate where water depth is less than 15 feet at low tide. This level of water production is based on...
read more
These new build vessels are custom built for various fishing applications including bottom trawling, purse seining, long lining, mining, squid fishing and research, and many vessels are custom built to satisfy the customer’s every need. Vessels are designed with a large hold capacity, yet still maintain spacious engine room and accommodation areas. Many of the vessels are built to include more than one application to allow for products to be processed at sea. The material is also so versatile that a range of sizes are available from 33 feet to 100 feet based on existing moulds.
This v...
read more
Timber vessel covered with glass fibre material;
• Length: 13.63 m ;
• Engine: 6/71 DDC engine (Fully reconditioned January 2021);
• Gearbox;
• Electrical wiring; and
• Life rafts
Survey Due...
read more
Length: | 13.63m |
Location: | Western Cape South Africa |
View Details |
The vessel is described as follows:
The vessel is a steel-hulled fishing vessel with two decks, a cruiser stem, six bulkheads and three masts.
The superstructure is fitted amidships; the forecastle is enclosed; there is a shelter deck on the working deck aft of the accommodation; five holds below the main deck with four blast freezers on the main deck below the wheelhouse, and the engine room is below the main deck with accommodations for twenty-nine pax.
*** Dry Docking Complete 6 February 2024 ***
TYPE: Fishing Vessel / Freezer Longliner
BUILDER: Sen Koh Shipbuilding –...
read more
Year: | 1989 |
Length: | 49.5m |
Location: | Western Cape South Africa |
View Details |
The vessel is a steel hulled type fishing vessel, with one deck, a raked stem, transom stern, four bulkheads and one mast.
The superstructure is fitted forward of amidships, the forecastle is enclosed, there is a shelterdeck aft of the accommodation, there is one hold below the main deck and the engine room is aft below the main deck and factory.
Registered length: 27.14 metres
Length overall: 28.945 metres
Length between perpendiculars: 26.25 metres
Breadth: 6.40 metres
Depth moulded: 3.40 metres
GRT: 184.50 tonnes
NRT: 55.35 tonnes
Lightship: 207.83 tonnes
Built: 1974, Sandock ...
read more
Year: | 1974 |
Length: | 28.9m |
Location: | Western Cape South Africa |
View Details |
MATERIAL & TYPE OF CONSTRUCTION
Wooden hull carvel construction with GRP wheelhouse aft, one (1) deck, two (2) masts, one (1) fish hold, raked stem and cruiser stern.
BUILT BY Louw & Halvorsen/Misplon & Co., Cape Town
YEAR OF BUILD 1957
FISHING METHOD Pole
LENGTH 18.56 metres
BREADTH 2,84 metres
GROSS TONNAGE 75.89
NUMBER OF CREW Twenty (20)
FISHHOLD
The vessel has one (1) insulated fish hold. The hold has been lined with fibre-glass, hooks are provided on the deckhead and ponds are provided for the stowage of fish. The fish hold is equipped for fr...
read more
Year: | 1957 |
Length: | 19.93m |
Location: | Western Cape South Africa |
View Details |